MERYDOM 37-0541-01 Replacement for ROLLIX

Name: MERYDOM 37-0541-01
Brand: MERYDOM
SKU: 37-0541-01

Back to replacement catalog

ROLLIX 37 Series External gear outline drawing — 37 Series · External gear outlineClick image to enlarge

MERYDOM BRAND · CERTIFIED REPLACEMENT

37-0541-01

MERYDOM VerifiedEngineering certification · Rev Rev 1.0

MERYDOM-manufactured slewing bearing certified for interchange with ROLLIX 37-0541-01.

Certified product dataView complete specifications ↓

Overall OD (Do): 640 mm
Overall ID (di): 472 mm
Overall height: 56 mm
Gear arrangement: External gear
Mounting holes: 28 / 32 outer / inner
Bearing design: Light Series Ball

Factory assurance

Certified dimensional interchange
MERYDOM controlled materials
Factory documentation available

PRODUCT DIMENSIONS

Published dimensions and interfaces

Every available catalog dimension, mounting interface and gear value is shown here in the original published unit.

View complete specifications ↓

Dimensions

Overall height (HT): 56 mm
Overall outside diameter (ØDe): 640 mm
Outer ring height (He): 46 mm
Overall inside diameter (ØDi): 472 mm
Inner ring height (Hi): 46 mm
Assembly weight (Weight): 44 kg

Mounting

Outer ring pilot diameter (ØCe): 542.5 mm
Inner ring pilot diameter (ØCi): 474 mm
Outer ring hole type (External ring hole type): Bd
Outer ring bolt circle (ØFe): 585 mm
Outer ring mounting-hole count (Ne): 28
Outer ring mounting-hole specification (Dhe): M12 mm
Inner ring hole type (Inner ring hole type): Th
Inner ring bolt circle (ØFi): 498 mm
Inner ring mounting-hole count (Ni): 32
Inner ring mounting-hole specification (Dhi): 14 mm

Gear

Gear module (Module): 6 mm
Gear tooth count (Z): 105
Gear face width (W): 46 mm

MERYDOM CERTIFIED SPECIFICATION

Product specifications

MERYDOM product identity, certification, materials and dimensional data for the certified replacement.

MERYDOM Factory Verified · Rev Rev 1.0

Technical parameter	MERYDOM certified product value
MERYDOM Certified Product
Product brand	MERYDOM
MERYDOM model	37-0541-01
Certified interchangeable with	ROLLIX 37-0541-01
Factory verification	Level 3 · Engineering Verified
Approved drawing revision	Rev 1.0
Reviewed by	MERYDOM Engineering Department
Certification date	2026-08-17
Materials
Ring material options	42CrMo / 50Mn
Seal material	NBR · Nitrile rubber
Spacer material options	Engineering nylon / Brass
Identification
Reference brand	ROLLIX
Series	37 Series
Reference model	37-0541-01
System of measurement	Metric
Bearing structure	Light Series Ball
Gear arrangement	External gear
Dimensions
Overall height (HT)	56 mm
Overall outside diameter (ØDe)	640 mm
Outer ring height (He)	46 mm
Overall inside diameter (ØDi)	472 mm
Inner ring height (Hi)	46 mm
Assembly weight (Weight)	44 kg
Mounting
Outer ring pilot diameter (ØCe)	542.5 mm
Inner ring pilot diameter (ØCi)	474 mm
Outer ring hole type (External ring hole type)	Bd
Outer ring bolt circle (ØFe)	585 mm
Outer ring mounting-hole count (Ne)	28
Outer ring mounting-hole specification (Dhe)	M12 mm
Inner ring hole type (Inner ring hole type)	Th
Inner ring bolt circle (ØFi)	498 mm
Inner ring mounting-hole count (Ni)	32
Inner ring mounting-hole specification (Dhi)	14 mm
Gear
Gear module (Module)	6 mm
Gear tooth count (Z)	105
Gear face width (W)	46 mm
Ratings
Gear capacity, unhardened (Gear capacity unhardened)	41 kN
Miscellaneous
Ring with greasing holes (Ring with greasing holes)	I
Greasing hole type (Greasing hole type)	R

Level 3 · MERYDOM Engineering VerifiedCertified 2026-08-17 by MERYDOM Engineering Department.

SERIES LOAD CAPACITY

37 Series load chart

Use the model designation in the catalog legend as an initial moment-and-thrust capacity reference.

Engineering selection note

This catalog chart is a preliminary selection aid. Final MERYDOM application approval must also consider mounting rigidity, bolt capacity, duty cycle, lubrication and operating conditions.

MERYDOM ENGINEERING

Factory-certified replacement design

This MERYDOM bearing has been reviewed against the published model envelope, mounting interfaces, gear configuration and declared material specification for replacement use.

Certified interchangeability

Matching model designation and installation envelope
Reviewed mounting-hole and bolt-circle interfaces
Gear arrangement matched to the referenced configuration

MERYDOM construction

42CrMo or 50Mn ring material options
NBR nitrile-rubber sealing system
Engineering nylon or brass spacer options

Factory documentation

Engineering verification by MERYDOM Engineering Department
Default approved drawing revision 1.0
Certification date linked to the data-import record

Application confirmation

Confirm support flatness, bolt grade and preload
Verify applied loads, duty cycle and lubrication
Confirm temperature, environment and installation conditions

RELATED CERTIFIED PRODUCTS

Nearby MERYDOM models in 37 Series

Each listed MERYDOM model is factory-certified for interchange with the matching referenced-brand model shown on its own product page.

MERYDOM model	Gear	OD × ID × H
37-0641-01	External gear	742 × 572 × 56 mm	View details →
37-0411-01	External gear	505 × 342 × 56 mm	View details →
37-0741-01	External gear	840 × 672 × 56 mm	View details →
37-0841-01	External gear	950 × 772 × 56 mm	View details →

LEGAL & ENGINEERING NOTICE

Independent replacement certification

MERYDOM is the manufacturer and certifying party for the MERYDOM product displayed on this page.
Third-party brand names and model numbers remain the property of their respective owners and are used only to identify the intended interchange reference.
MERYDOM is an independent manufacturer and is not affiliated with, endorsed by or sponsored by the referenced OEM.
The interchangeability statement applies to the matching model designation and the published verification scope; application suitability still depends on loads, duty cycle, installation, lubrication and operating environment.
The approved quotation, manufacturing drawing and contract technical agreement control the final supplied product.