INSPECTION & TESTING

Inspection & Testing Capability

MERYDOM verifies critical dimensions, gear geometry, hardness, material conformity, and functional performance against approved drawings and project inspection requirements.

Dimensional InspectionCritical dimensions and mounting interfaces

Gear InspectionGear geometry and runout checks

Hardness VerificationRaceway and gear hardness evidence

FAI & ReportsRecorded results and customer formats

CAPABILITIES & EVIDENCE

Inspection capabilities with supporting reports

Each capability combines the inspection scope, typical method, and documentary evidence available for direct review.

CapabilityChecks & methodEvidenceDocument access

Material Verification

Typical checks

Material grade and heat number
Chemical composition and mechanical properties
EN 10204 3.1 documentation

MethodSupplier certificate review and material identification checks before production release.

Material Certificate Sample

Redacted EN 10204 3.1 material certificate and material-identification evidence.

Real working file · PDF · 633.8 KB

Preview Download PDF

Dimensional Inspection

Typical checks

OD, ID, height, and mounting dimensions
Hole diameter, depth, position, and counterbores
Agreed geometric and interface characteristics

MethodDirect and comparative measurement using instruments selected for the required range and tolerance.

Dimensional Inspection Report

Drawing dimensions, recorded actual values, and acceptance status.

Real working file · PDF · 7.0 MB

Preview Download PDF

Gear Inspection

Typical checks

Module and number of teeth
Tooth thickness or span measurement
Gear runout and related dimensions

MethodGear checks selected according to gear form, module, size, and drawing requirements.

Gear Inspection Report

Agreed gear characteristics, measurement results, and acceptance status.

Real working file · PDF · 725.2 KB

Preview Download PDF

Hardness & Heat Treatment

Typical checks

Raceway hardness
Gear hardness
Hardened layer or batch evidence where required

MethodHardness verification at agreed positions with supporting heat-treatment documentation.

Heat Treatment & Hardness Report

Raceway or gear hardness results and supporting process evidence.

Real working file · PDF · 2.1 MB

Preview Download PDF

Functional Inspection

Typical checks

Rotational condition or torque where specified
Axial/radial clearance or backlash where specified
Seal, lubrication, and assembly condition

MethodProject-specific checks performed after assembly and before final release.

Functional Inspection Record

Project-specific assembly, clearance, torque, or functional check results.

Real working file · PDF · 7.0 MB

Preview Download PDF

Final Release Inspection

Typical checks

Drawing revision confirmation
Appearance and product marking
Packing and document completeness

MethodFinal comparison against the approved drawing, identification, and release checklist.

FAI / Final Inspection Report

First-article or final inspection structure with drawing references and actual results.

Real working file · PDF · 7.0 MB

Preview Download PDF

Capability confirmation is drawing-specific

Final measurement methods, tolerances, sampling, equipment range, and documentation are confirmed after review of the drawing and project specification.

EQUIPMENT & CALIBRATION

Controlled measurement for production release

Inspection tools are selected for the product size, characteristic, and tolerance. Measuring equipment used for acceptance is identified and periodically calibrated or verified.

Third-party calibration certificate set

Representative visual for the calibration-document section.

CUSTOM INSPECTION SUPPORT

Inspection plans built around your drawing

MERYDOM can incorporate customer-specific inspection and documentation requirements into the project quality package before production begins.

Customer-specific tolerances
Critical characteristic inspection
Balloon drawings and FAI
Customer report templates
Witness and hold points
Third-party inspection coordination